Back
400G/200G CFP2
400G/200G CFP2

OM8769XX200 is intended to be used on the host board of system integrators to support transmission over DWDM links in Metro networks. It comprises high-data lanes, a single reference clock from hosts, a single 3.3 V power supply, an MDIO interface, and dedicated alarm and control pins. The module uses a 104-pin CFP2 MSA connector for all electrical interfaces with the host board, whereas the optical interfaces on the line side are provided through the optical receptacles on the CFP2. The module can be portioned into three functional parts: Tx path, Rx path and control & power block. All control interface pins are routed to the MCU and oDSP. The MCU is also used for fast control inside the module such as modulator bias adjustment, firmware management, overall control coordination and status reporting.

Features
Transmission reach beyond 640 km@400G and 2000 km@200G over SMF
Supports 75 GHz/100 GHz channel spacing
Supports PM-16QAM(400G)/PM-QPSK(200G) modulation
Compliant with CFP MSA Management Interface Specification Version 2.6 (R06a)
Single 3.3 V power supply
Operating case temperature: 0°C to 75°C
Hot-pluggable 104-pin electrical interface
Supports OTN Framer
Compliant with CFP2 MSA Hardware Specification Rev. 1.0
LC duplex connector
Typical power consumption: 32 W
Applications
400G Ethernet
400G OTN
400G DCI
400G Ethernet
400G OTN
400G DCI
Product Specification
P/N
OM8769XX200
Data Rate/Gbps
Form Factor
Transceiver
Interface
Media
Reach/km
Power Consumption/W
Temperature/℃
Tx Output/dBm
Rx Input/dBm
400
200
CFP2
DWDM
LC
SMF
640
2000
36
0 to 75
–10 to +1
–19 to +1
P/N
OM8769XX200
Data Rate/Gbps
400
200
Form Factor
CFP2
Transceiver
DWDM
Interface
LC
Media
SMF
Reach/km
640
2000
Power Consumption/W
36
Temperature/℃
0 to 75
Tx Output/dBm
–10 to +1
Rx Input/dBm
–19 to +1
Search More Products

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy